$20 Discount on all orders over $150.00. Discount automatically applied at check out

Rule LoPro Series Bilge Pump

Product Description

 

Rule's LoPro Series Bilge Pumps are only 2.4" high. The LP900S model features two automated modes. The first one engages the pump when the water level reaches 2" or 1.3" (user choice); and the second one checks for water by briefly turning on the pump every 2.5 minutes. The LP900D model uses a traditional float and/or panel switch for operation. The entire body swivels up to 180°, making the pump extremely easy to install.

PRODUCT FEATURES

  • Choice of operational mode to meet your specific requirements – high or low water sensing mode or automatic timed mode
  • 900 (gph) 3407 (lph)
  • Compact, efficient, long-life motors with ability to run dry for short periods
  • Fail safe back up feature
  • Fully rotating discharge body to ease install
  • Choice of discharge ports supplied with each pump
  • Backflow prevention valve
  • Horizontal or vertical mounting to accommodate your boat’s bilge
  • Built-in Thermal Cut-Off (TCO) provides added protection for pump and vessel
  • Marine-grade blocked wiring
  • Silent operation with minimal vibration
  • Ignition protection
  • CE and ISO 8849 certification

 

PUMPS LP900D LP900S
Flow Rate 900 (gph) 3407 (lph) 900 (gph) 3407 (lph)
Port Type 3/4" (19mm), 1" (25mm), 1 1/8" (28mm) Straight Hose barb or 3/4"(19mm) 90º Elbow 3/4" (19mm), 1" (25mm), 1 1/8" (28mm) Straight Hose barb or 3/4"(19mm) 90º Elbow
Voltage 12 (Vdc) 12 (Vdc)
Amp Draw 4 (amp) 4 (amp)
Fuse Size 7.5 (amp) 7.5 (amp)
Weight 0.459 (kg) 1 (lb) 0.459 (kg) 1 (lb)
Operational Mode Non-automatic model Automatic model
Dimensions (L x W x H) 7.6 x 2.3 x 2.3 (inches) 193 x 58.4 x 58.4 (mm) 9.35 x 2.3 x 2.3 (inches) 237.5 x 58.4 x 58.4 (mm)
$99.95

Related Products